MEX vapour recovery pumps for petrol stations
Choose a safe, economical and sustainable vapour recovery system
For decades, our high-quality vapour recovery pumps have ensured safe and cost-effective operation at petrol stations worldwide. Whether belt-driven or direct-drive, whether featuring a traditional proportional valve or modern electronic speed control – we’d be happy to advise you on the various models.
The new “MEX Vapour Control” product range is based on a direct drive and features electronic speed control, thereby eliminating the need for the proportional valve previously required for vapour recovery. The electronic speed control ensures that petrol vapours are extracted optimally whilst simultaneously reducing mechanical wear on the motor and other mechanical components, as these only operate at maximum power when required. This ensures better energy efficiency and a longer service life.
This technological innovation provides you with a comprehensive vapour recovery solution for use in petrol pumps. At the same time, you are investing in a highly durable vapour recovery pump that offers great potential for the ‘Smart Solution’ of tomorrow.
Your benefits at a glance
Cost-effective & durable
- Cost-effective thanks to high-quality construction made in Germany
- Long service life of the fuel-resistant bearings and components
- Constant flow rate throughout the entire service life thanks to a fuel-resistant bearing grease seal and a self-adjusting piston seal
Versatile & adaptable
- Versatile drive:–
- Belt or coupling drive (MEX 0831-11/600)
- Direct drive (MEX 0544)
- Also suitable for retrofitting
- Various installation orientations possible
- Wide operating temperature range: -40 °C to +60 °C
Safe & robust
- Explosion protection in accordance with ATEX, certified to ATEX (2014/34/EU), TÜV, QS, PTB and CN-EX
- Integrated flame arresters on the inlet and outlet sides for maximum safety
- Suitable for E85 with IIA
- Flame arresters – E100 suitable with IIB1 flame arresters
- Also suitable as a flame arrestor in gas recirculation systems
- Resistant to condensate and liquids thanks to a patented pre-chamber with an integrated drainage system
Versatile & easy to maintain
- Ideally suited for worldwide operation thanks to motor speeds adapted for 50 Hz and 60 Hz
- Universal pump heads fit all motor variants
- Quick and easy removal of the pump head from the motor via a special coupling
- Direction of rotation-independent
Discover the five product ranges at a glance
MEX Vapour Control
The complete solution for your fuel dispenser.
The MEX Vapour Control vapour recovery pump consists of a particularly compact MEX direct-drive single-cylinder motor and a frequency converter, which controls the motor’s speed for vapour recovery.
The “DürrTronic MEX-Soft” PC software is available free of charge to customers for the installation and calibration of the vapour recovery system.
Get advice now
Specific benefits of the MEX Vapour Control gas recirculation pump:
- Reduced operating costs through the use of an energy-efficient, high-efficiency IE3 motor
- Longer service life and reduced maintenance requirements thanks to lower wear on mechanical components resulting from soft start-up with low inrush currents
- Precise speed control via a frequency converter rather than a proportional valve
- Effective use of electrical energy thanks to a high power factor
- Quiet operation thanks to optimal control of the vapour recovery pump for the specific application
- Reduced heat generation through more precise utilisation of the gas recirculation pump during the refuelling process
| Electrical data | ||||||||
|---|---|---|---|---|---|---|---|---|
| Type | Volume flow V (l/min) | End pressure (mbar) | Relay (V) | Rated current (A) | Nominal voltage (V) | Frequency (Hz) | Frequency converter (V) | Dimensions L x W x H (mm) |
| 0544100200 with VFD 0545100001 | 42 at 1800 rpm | 300 | without | 0.65 | 230 3~ | 50 | 230 1~ | 232 x 160 x 209 |
Remarks:
- V = Volume flow at back pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
- Sound level < 70 dB(A)
- pabs = absolute pressure
MEX Direct Drive 1-cylinder 0544
For use in petrol pumps with only one dispensing side.
- ATEX and TÜV approvals
- Oil-free and maintenance-free
- Not affected by condensation
- Direction-of-rotation-independent
- Sound level < 70 dB(A)
- IP 10 protection rating
| Electrical data | |||||||
|---|---|---|---|---|---|---|---|
| Type | Volume flow V (l/min) | End pressure (mbar) | Relay (V) | Rated current (A) | Nominal voltage (V) | Frequency (Hz) | Dimensions L x W x H (mm) |
| 3~ motor, 50 Hz | |||||||
| 0544 1000K | 53 | <300 | 24 DC | 0.75 | 380-415 | 50 | 312 x 174 x 201 |
| 0544 1100K | 53 | <300 | without | 0.75 | 380-415 | 50 | 312 x 174 x 201 |
| 0544 1700K | 53 | <300 | 220-240 AC | 0.75 | 380-415 | 50 | 312 x 174 x 201 |
| 1~ motor, 50 Hz | |||||||
| 0544 1200K | 53 | <300 | 24 DC | 2.30 | 220-230 | 50 | 367 x 174 x 201 |
| 0544 1250K | 53 | <300 | 220-240 AC | 2.30 | 220-230 | 50 | 367 x 174 x 201 |
| 0544 1300K | 53 | <300 | without | 2.30 | 220-230 | 50 | 367 x 174 x 201 |
| 1~ motor, 60 Hz | |||||||
| 0544 1400K | 44 | <300 | 24 DC | 1.80 | 110-127 | 60 | 367 x 174 x 201 |
| 0544 1800K | 38 | <300 | without | 1.15 | 220 | 60 | 367 x 174 x 201 |
Remarks:
- V = Volume flow at back pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
- Sound level < 70 dB(A)
- pabs = absolute pressure
MEX direct-drive single-cylinder unit with DC motor
For mobile petrol stations.
- ATEX and TÜV approvals
- Oil-free and maintenance-free
- Not affected by condensation
- Direction-of-rotation-independent
- Sound level < 70 dB(A)
- IP 10 protection rating
| Electrical data | |||||||
|---|---|---|---|---|---|---|---|
| Type | Volume flow V (l/min) | End pressure (mbar) | Relay (V) | Rated current (A) | Nominal voltage (V) | Frequency (Hz) | Dimensions L x W x H (mm) |
| 0544100096* | 53 | <300 | 12 DC | 20 | 12 DC | – | 423 x 176 x 201 |
| 0544100152 | 53 | <300 | 24 DC | 13 | 24 DC | – | 423 x 176 x 201 |
Remarks:
- V = Volume flow at back pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
- Sound level < 70 dB(A)
- pabs = absolute pressure
* Coming soon.
MEX Direct Drive 2-cylinder
For use in petrol pumps with two dispensing sides.
- ATEX and TÜV approvals
- Oil-free and maintenance-free
- Not affected by condensation
- Direction-of-rotation-independent
- Sound level < 70 dB(A)
- IP 10 protection rating
| Electrical data | |||||||
|---|---|---|---|---|---|---|---|
| Type | Volume flow V (l/min) | End pressure (mbar) | Relay (V) | Rated current (A) | Nominal voltage (V) | Frequency (Hz) | Dimensions L x W x H (mm) |
| 3~ motor, 50 Hz | |||||||
| 0544 2000K | 53 | <300 | 24 DC | 1.0 | 380-415 | 50 | 434 x 174 x 201 |
| 0544 2100K | 53 | <300 | without | 1.0 | 380-415 | 50 | 434 x 174 x 201 |
| 0544 2700K | 53 | <300 | 220-240 AC | 1.0 | 380-415 | 50 | 434 x 174 x 201 |
| 1~ motor, 50 Hz | |||||||
| 0544 2200K | 53 | <300 | 24 DC | 3.0 | 220-230 | 50 | 489 x 174 x 201 |
| 0544 2250K | 53 | <300 | 230 AC | 3.0 | 220-230 | 50 | 489 x 174 x 201 |
| 0544 2300K | 53 | <300 | without | 3.0 | 220-230 | 50 | 489 x 174 x 201 |
| 1~ motor, 60 Hz | |||||||
| 0544 2400K | 44 | <300 | 24 DC | 2.9 | 110-127 | 60 | 489 x 174 x 201 |
| 0544 2800K | 38 | <300 | without | 1.7 | 220 | 60 | 489 x 174 x 201 |
| 3~ motor, 60 Hz | 44 | <300 | 24 DC | 1.2/0.7 | 230/400 | 60 | 434 x 174 x 201 |
Remarks:
- V = Volume flow at back pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
- Sound level < 70 dB(A)
- pabs = absolute pres
MEX Belt Drive 0831
- ATEX and TÜV approvals
- Oil-free and maintenance-free
- Not affected by condensation
- Direction-of-rotation-independent
- Sound level < 70 dB(A)
| Type | Volume flow V (l/min) | End pressure (mbar) | Recommended motor power (W) | Maximum permissible speed of rotation (1/min) | Dimensions L x W x H (mm) |
|---|---|---|---|---|---|
| 0831-11/600 | 44 | ≈ 150 | 150 (200) | 2300 | 117 x 88 x 188 |
Accessory: belt pulley (94 mm effective diameter) on request.
Remarks:
- V = Volume flow at back pressure pe = 150 mbar and a suction pressure pabs = 900 mbar
- Sound level < 70 dB(A)
- pabs = absolute pressure
Are you an expert in the maintenance of petrol pumps?
Then why not simply become an official service partner of Dürr Technik!
We will certify you and support you in the professional replacement of genuine spare parts for MEX vapour recovery pumps.
Your benefits: You’ll receive more enquiries from customers with MEX gas return pumps. You’ll benefit from the manufacturer’s expertise and partner terms.
By using genuine parts, you’ll ensure your customers enjoy consistently high performance and trouble-free operation of their gas return pumps.
Certified service partners for the maintenance of MEX vapour recovery pumps – worldwide
Ensure consistently high performance and trouble-free operation with a certified maintenance service that uses only genuine parts for the maintenance of your MEX gas return pumps.
Would you like to find out more about our gas return pumps? We’d be happy to advise you.
Do you have any questions or need assistance?
We’re here to help.
Use our contact form and our team will get back to you shortly.
